CINCINNATI FAN 7697 Snider Road Mason, Ohio 45040-9135 Phone: (513) 573-0600 Fax: (513) 573-0640
sales@cincinnatifan.com
|
Axial Fans
Tube Axial Duct Fans (Tube Fans)
Contact a Sales Engineer – over 170 across the USA and Canada to assist you
MODELS:
|
Direct Driven Model
|
|
Model DDF
- Model DDF is direct driven with the motor in the air stream.
- Maximum standard air sream temperature is 104°F (40°C). Clean, dry air stream.
- Totally Enclosed Fan Cooled (TEFC) motors are standard. Explosion Proof motors are also available.
|
|
Belt Driven Models
|
|
Models BAF, TAF, WAF, HTF & WAF/HTF
- Heavy-duty motor base has four-point adjustment for proper belt tension and sheave alignment.
- Fan shafts are turned, ground and polished steel (or stainless steel).
- V-Belt drives are selected for a minimum of 1.3 times the nominal horsepower.
|
|
|
Model BAF
|
- Model BAF is for clean, dry air not exceeding 175°F (80°C).
- Two sealed ball bearings in cast aluminum housing with grease reservoir.
|
|
|
Model TAF
|
- Model TAF is for clean, dry air not exceeding 200°F (93°C).
- Heavy duty, independent, cast iron, pillow block, ball bearings with external grease
fittings.
- Galvanized steel bearing cover.
- Airfoil (tear drop) belt tube minimizes turbulence and improves efficiency.
|
|
|
Model WAF
|
- Model WAF is excellent for moisture laden or other air strem contaminants not exceeding
200°F (93°C).
- Heavy duty, independent, cast iron, pillow block, ball bearings with external grease
fittings.
- Galvanized steel bearing cover, gasketed and sealed. Moisure displacement collar
(not shown) on front of bearing cover is sealed with silicone.
- Airfoil (tear drop) belt tube minimizes turbulence and improves efficiency.
|
|
|
Model HTF
|
- Model HTF is for high temperature, dry air from 201°F (94°C) to 375°F
(191°C)
- Heavy duty, independent, cast iron, pillow block, ball bearings with high temperature
grease and external grease fittings.
- Galvanized steel insulated bearing cover with large hole around shaft to induce
ambient air thru insulated belt tube to cool bearings.
- Airfoil (tear drop) belt tube minimizes turbulence and improves efficiency.
- Model WAF/HTF is for moisture laden, high temperature air from 201°F (94°C)
to 375°F (191°C) NOT SHOWN. Same as Model HTF except with moisture displacement
collar and front seal plate from Model WAF.
|
|
|
 |
