Portable Fume Exhausters: Portable Blowers
Models EBR-50, EBR-75, EBR-100, EBR-150 and EBR-200
Models EBM-25, EBM-75 and EBM-100
Contact a Sales Engineer – over 170 across the USA and
Canada to assist you
- AMCA Type B spark resistant construction standard for all models.
- Totally Enclosed Fan Cooled (TEFC) motors are standard.
- Motors are continuous duty, full horsepower rated. NOT duty rated.
- Heavy-duty 14 gauge steel blower housing on all "S" models.
- All models available with 115/230 Volt, 1 Phase, 60 Cycle or 230/460 Volt,
3 Phase, 60 Cycle motors. 575 Volt and 50 Cycle motors also available.
- Single Phase, TEFC motors (up to 1 HP) come with an 8 foot cord, 3 prong grounded
plug and a switch pre-wired for 115 Volt, 60 Cycle.
- Inlet and discharge guards, required by OSHA, are standard.
- Safe, no exposed moving parts.
Benefits of Cincinnati Fan "Fume-Master Fume Exhausters" are:
Fume Exhauster frame can be bolted to a table, wall or beam as a permanent location.
Or they can be carried, or bolted to a two wheeled dolly or four wheeled dolly cart
for portability from one location to another. More flexibility.
SPARK RESISTANT CONSTRUCTION:
All models are AMCA Type B spark resistant so they can be used in explosive atmosphere
locations. Some locations will also require an Explosion Proof (EXP) motor as required
by the NEC (National Electric Code) and/or the NFPA (National Fire Protection Association).
SAFER WORKING ENVIRONMENT:
Collecting and exhausting fumes and smoke "at the source", provides a much
healthier working environment. Protects workers.
Heavy-duty construction of all fan components provide long, dependable service.
There are many Cincinnati Fan "Fume-Master Fume Exhausters" still in operation
in small welding shops and factories for over 20 years. Many years of dependable
MADE IN THE U.S.A.:
In an era when small machinery manufacturing is continually going over seas, we
are proud that Cincinnati Fan "Fume-Master Fume Exhausters" are still made
and assembled in our factory in Mason, Ohio. You will find imported products, some
of which are near copies of our design and/or claim to be as efficient or deliver
more CFM. If you do, first ask them for certified performance data. Ours is in our
catalog. Your selection should not turn out to be a disappointment. Compare the
features, benefits and component material. We also offer many accessory nozzles,
reducers, hose, clamps, and dollies to fit our units. Imported models don’t offer
these additional system components. And, who will you call for assistance or service?
Help support the U.S.A.
Our catalog contains information on how to select the proper size fume exhauster.
No guess work.