Centrifugal Fans
Backward Inclined Blowers:
Model SQBI
Contact a Sales Engineer – over 170 across the USA and Canada to assist you
FEATURES:
- All models available with multiple width housing, two wheel types and wheel widths
from 50% to 100%, in 5% increments, to deliver the performance you need with a direct
driven blower.
- Continuous welded housings, instead of lock seams, eliminate air leakage.
- Heavy gauge steel bases, with internal bracing, maximize rigidity and assure long
equipment life.
- Four discharge positions and two rotations available.
- Available with AMCA Types A, B or C spark resistant construction.
- Removable inlet & drive side plates allow for removal of blower wheel or motor,
or shaft and bearings on belt driven model, without disconnecting inlet or discharge
connections.
- All fans receive a mechanical run test to assure proper balance and alignment before
shipping.
- Belt driven model includes heavy-duty, grease lubricated, self-aligning, cast iron,
pillow block bearings selected for optimal performance.
- Fan shaft on belt driven model is turned, ground and polished and receives a high
quality rust preventative coating prior to shipment.
- Arrangement 9 comes standard with belt guard and two support legs for shipping and
mounting support.
- All models are also available in aluminum or all stainless steel construction.
BENEFITS:
Benefits of Model "SQBI" Backward Inclined Blowers are:
MULTIPLE WHEEL SELECTIONS: Each size and class is available with
two wheel types and multiple widths from 50% to 100%, in 5% increments, to deliver
the exact performance you need with a direct driven blower. Complete design
flexibility.
RUGGED CONSTRUCTION: Housings are heavy gauge steel and are continuously
welded to prevent leakage. Fan bases are 7 and 10 gauge steel with internal bracing
to prevent pulsation at all conditions. Less field problems.
EASE OF MAINTENANCE: Replacing a wheel or motor, or shaft and bearings
on belt driven models, is easily accomplished without disturbing the inlet and/or
discharge connections. Minimizes down time.
QUALITY COMPONENTS: Belt driven model has self-aligning, cast iron,
grease lubricated, pillow block bearings sized for a minimum 150,000 hours average
life. Fan shaft is turned, ground and polished and is coated with a high quality
rust preventative before shipment. Long dependable service.
|
