Portable Dust Collectors

Models: 33S, 50S, 75S, 100S, 150S, 200S and 300S

• Spark resistant, self-cleaning, cast aluminum, radial wheels are standard.
• Totally Enclosed motors are standard.
• Motors are continuous duty, full horsepower rated. NOT duty rated.
• Heavy-duty 14 gauge steel blower housing is standard.
• 1/3 - 3/4 horsepower models come with a 10 micron dust bag. 1 – 3 horsepower models come with a 5 micron dust bag. 1 micron dust bags are available on ¾ to 3 horsepower models.
• All models available with 3 Phase, 230/460 Volt, 60 Cycle motors. 1/3 HP up to 2 HP models also available with 1 Phase, 115/230 Volt, 60 Cycle motors. 575 Volt and 50 Cycle motors also available on most models.
• Single Phase, TEFC motors (up to 1 HP) come with an 8 foot cord, 3 prong grounded plug and a switch pre-wired for 115 Volt, 60 Cycle.
• Drum lids on 1/3 to 3/4 HP models fit over standard 30 gallon steel garbage cans or 35 gallon steel or fire-resistant, fiber drums having a maximum diameter of 20-1/2”.
• Drum lids on 1 to 3 HP models fit over standard 55 gallon steel drums or foil lined, fiber drums having a maximum diameter of 24”. Fiber drums must be able to support the unit weight.
• Drums are not included and plastic drums should never be used for any models.
• Safe, no exposed moving parts.

HIGH EFFICIENT TWO-STAGE DESIGN:
Our Two-Stage design is far more efficient than a 1 stage design. The heavy dust and chips, or abrasive material is separated in the cyclonic separator first stage and only the lighter dust passes through the blower to the second stage filter bag. Single stage collectors draw all the large, heavy, abrasive dust into the blower which causes rapid wearing of the blower wheel and housing and can very quickly cause a dangerous wheel unbalance problem. Superior efficiency.

SPARK RESISTANT WHEELS:
Spark resistant, self-cleaning, cast aluminum radial wheels are ideal for dust collection applications. They are spark resistant to reduce the chance of fires and the radial design minimizes dust build-up on the wheel that would cause excessive vibration leading to pre-mature wheel and/or motor bearing failure. Much safer than steel wheels.

SAFER WORKING ENVIRONMENT:
By collecting dust and grit "at the source", you won’t need to vacuum the floor. It is also much easier to see the part you are working on without the dust and debris clouding your view. By utilizing 10, 5 or 1 micron filter bags, the operator can breath in much cleaner air. Provides a much healthier working environment.

RUGGED CONSTRUCTION:
Heavy-duty construction of all fan components provide long, dependable service. There are many Cincinnati Fan "Dust-Master Dust Collectors" still in operation in home work shops and factories for over 20 years. Many years of dependable service.

MADE IN THE U.S.A.:
In an era when small machinery manufacturing is continually going over seas, we are proud that Cincinnati Fan "Dust-Master Dust Collectors" are still made and assembled in our factory in Mason, Ohio. You will find imported products, some of which are near copies of our design and/or claim to be as efficient or deliver more CFM. If you do, first ask them for certified performance data. Ours is in our catalog. Your selection should not turn out to be a disappointment. Compare the features, benefits and component material. We also offer many accessory nozzles, reducers, hose, clamps, dollies and dust bag materials to fit our units. Imported models don’t offer these additional system components. And, who will you call for assistance or service? Help support the U.S.A.

ENGINEERING ASSISTANCE:
Our catalog contains information on how to select the proper size dust collector and filter bag material. No guess work.